Accent laminate color
€0.00
-
Accent laminates are glued up of ~2mm thick black or white FR4 and 2-1mm thick wood laminates. Wood material options are the same as for riser materials. But for diffrent colors that woud be of:
- Red color bubinga or SRF cocobolo,
- brown color zebrano or merbau,
- dark brown/chocolate color wenge,
- tan color hard maple,
- green color CWP GGR
- pink color CWP pink
- etc.
Final accent laminate thickness should be 12mm for OPR and TDR bow models and 6mm for HRL longbow model. So you can choose combination of 6-10 laminates for TDR/OPR 3-5 for HRL. But one thing to keep in mind is that for higher poundage TDR or OPR bows at least half of laminates should be made of black FR4. This gives extra stifnes and durability for riser. Lower poundage bows can be made with only wood accent laminates.
At the moment FR4 is available in black and white color only but in future I should get red, yellow and all kind of colors.
IF YOU DON'T WANT TO OVERCOMPLICATE ORDERING PROCESS THEN I CAN SELECT ACCENT LAMINATE COLOR AND PATTERN MYSELF. I WILL TRY TO MATCH THEM TO REST OF BOW MATERIALS/COLORS.
interesetd_in_more
Grip stippling
15.00€
Grip stippling - grip surface is covered with tiny hole pattern that creates more traction.
Stippling can be done for aesthetic and also practical reasons. Under adverse conditions in which one's hands may be slick form sweat, dust or blood , stippling will provide better grip on your bow.
OPR (ONE PIECE RECURVE)
365.00€
Forward riser design one piece recurve bow.
Designed for good arrow speed and shooting stability. These bows are more stable than classic traditional recurve bows because of higher bracing height that gives better arrow clearence and forward riser that makes bow less torque sensitivite in grip. Arrow speed is about the same or better because of more pronounced limb profile and smaller limb tips. Thick mycarta/G10 accent lines in riser gives extra stifness, weight and durability. And lastly forward riser makes bow perform like longer bow because that forward riser/higher bracing height reduces dynamic draw length. This might be useful in hunting/3d shooting where shorter - more manoeuvrable bow is advantage.
In standard bow comes with installed shelf and strike plate, string with cat whisker silencers, adjustable height tie on nocking point.
In standard center cut is 1/8" past center (~3.0mm). For additional cost it can be cut up to 3/16" (4.7mm) past center. To do this extra reinorcement material in riser is added and there might be also some draw weight limitations.
All bows are made according to AMO standard and made +/- 1LBS to ordered draw weight
- BOW LENGTH: 56", 58", 60", 62"
- DRAW WEIGHT: 20-65#@28" AMO
- RISER: Wenge, Bubinga, Merbau, Walnut, Hard maple, Ash, Oak, Iroko, Zebrano, Polisander,CWP Actionwood, SaRaiFo actionwood, Mycarta.
- LIMBS: Hard maple or bamboo core, Stabilcore composite laminate, Clear or Black fiberglass laminates, Decorative veneer under clear fiberglass
- LIMB VENEER OPTIONS: Olive ash, Curly bubinga, Ziricote, Santos polisander, Zebrano,CWP Actionwood, Walnut, Elm, Bocote, Lima, Red gum, macasar ebony, color dyed maple or birch
- STRING: Fast Flight Plus or BCY Spectra 652 flemish twist string with tie on nocking point. String thickness in standard is made to fit carbon/aluminium arrow nocks. Please specify if you plan to use wood arrows, then string will be made thicker.
| Draw length | Recommended bow length |
| <26" | 56" |
| 26"- 28" | 58" |
| 28"-30" | 60" |
| >30" | 62" |
But you can step one bow length size up if prefer more smoother/comfortable draw or one length size down if prefer better manoeuvrability in woods, compactness for transporting.